Page 1 of 1

FTP Error

PostPosted: Mon Apr 24, 2006 12:15 pm
by pccguy
I get an FTP error when I schedule a task, the task works fine when I select "Run Now" in the task scheduler window but doesn't work when it is scheduled using the sync service module.

[2006/04/24 07:40:01] ------------------------------------------------------------
[2006/04/24 07:40:01] STATUS-0:> Start running task 3: Sync: C:\Documents and Settings\1000\Application Data\TurboFTP and 65.36.248.117/c:/Websites/80659fcy/admin/units/1022.
[2006/04/24 07:40:01] STATUS-0:> Dialing connection ISP.Com... (attempt #1)
[2006/04/24 07:40:24] STATUS-0:> Dial-up connection established.
[2006/04/24 07:40:24] STATUS-0:> Connecting to 65.36.248.117 Port 21 (try #1) ...
[2006/04/24 07:40:24] STATUS-0:> Socket connected (IP = 65.36.248.117), waiting for server response ...
[2006/04/24 07:40:25] 220 Serv-U FTP-Server v2.5n for WinSock ready...
[2006/04/24 07:40:25] COMMAND-0:> USER waterfunstatio
[2006/04/24 07:40:25] 331 User name okay, need password.
[2006/04/24 07:40:25] COMMAND-0:> PASS (not shown)
[2006/04/24 07:40:25] 230 User logged in, proceed.
[2006/04/24 07:40:25] COMMAND-0:> SYST
[2006/04/24 07:40:26] 215 UNIX Type: L8
[2006/04/24 07:40:26] COMMAND-0:> FEAT
[2006/04/24 07:40:26] 500 'FEAT': command not understood.
[2006/04/24 07:40:26] COMMAND-0:> REST 100
[2006/04/24 07:40:26] 350 Restarting at 100 - send STORE or RETRIEVE to initiate transfer.
[2006/04/24 07:40:26] STATUS-0:> This site can resume broken downloads.
[2006/04/24 07:40:26] COMMAND-0:> REST 0
[2006/04/24 07:40:26] 350 Restarting at 0 - send STORE or RETRIEVE to initiate transfer.
[2006/04/24 07:40:26] COMMAND-0:> CWD /c:/Websites/80659fcy/admin/units/1022
[2006/04/24 07:40:27] 250 Directory changed to /c:/Websites/80659fcy/admin/units/1022
[2006/04/24 07:40:27] COMMAND-0:> pwd
[2006/04/24 07:40:27] 257 "/c:/Websites/80659fcy/admin/units/1022" is current directory.
[2006/04/24 07:40:27] COMMAND-0:> TYPE A
[2006/04/24 07:40:27] STATUS-0:> Data connection opened.
[2006/04/24 07:40:27] 200 Type set to A.
[2006/04/24 07:40:27] COMMAND-0:> PORT 4,225,31,171,4,21
[2006/04/24 07:40:27] 200 PORT Command successful.
[2006/04/24 07:40:27] COMMAND-0:> LIST
[2006/04/24 07:40:28] 150 Opening ASCII mode data connection for /bin/ls.
[2006/04/24 07:40:49] 426-Maximum disk quota limited to 2097152 Kbytes
[2006/04/24 07:40:49] Used disk quota 9063 Kbytes, available 2088088 Kbytes
[2006/04/24 07:40:49] 426 Data connection closed, transfer aborted.
[2006/04/24 07:40:49] ERROR-0:> FTP command failed.
[2006/04/24 07:40:58] ERROR-0:> Task cannot proceed, terminating...
[2006/04/24 07:40:58] COMMAND-0:> REST 0
[2006/04/24 07:40:58] COMMAND-0:> QUIT
[2006/04/24 07:40:59] 350 Restarting at 0 - send STORE or RETRIEVE to initiate transfer.
[2006/04/24 07:40:59] 221 Goodbye!

PostPosted: Tue Apr 25, 2006 1:08 am
by admin
Hi,

Could you try with PASV mode. The process stops at the following error:

426 Data connection closed, transfer aborted.

Leon